Product Description
Working voltage: 220VAC/50Hz
Temperature control: 0 -- 99 degrees C
Controlling the temperature difference: 0 -- 99 degrees C
Rated current: 5A (resistive load), the resistive heater below 1000W can be used safely
Dimensions (mm):138 x 98 x 40
Product features:
1 randomly set the start temperature (0 -- 99 degrees C) and stop temperature (0 -- 99 C),
Power supply of electric equipment automatic open and close all
2 temperature display, intuitive readings, simple operation
3 A new temperature sensor magnetic, sensitive reaction, high precision
Product Control Operating Instructions :
Because heating and cooling two requirements , so our thermostats have "hot start" and "cold start" two modes of operation .
1.High temperature start: " When you start temperature" is greater than " stop temperature ", the thermostat is in "hot start" state. For example : Set the "Stop temperature" of 20 ° C, " starting temperature" of 30 ° C, then when the measured temperature is higher than 30 ° C , the machine is turned on, running lights ( green ) light, power outlet at this time . When the measured temperature is less than equal to 20 ° C , the machine off, standby light ( red ) light, power outlet at this time . This start-up mode is mainly used for cooling, such as the open air , exhaust fan and so on.
2. Cold start: " When you start temperature" less than " stop temperature ", the thermostat is in the " cold start" condition. For example : Set the "Stop temperature" of 30 ° C, " starting temperature" of 20 ° C, then when the measured temperature is less than equal to 20 ° C , the machine is turned on, running lights ( green ) light, power outlet at this time . When the measured temperature is higher than 30 ° C, the machine off, standby light ( red ) light, power outlet at this time . This start-up mode is mainly used for heating .
Set Memory function:Thermostat will store your settings , set the time to ensure that power is not lost , without additional settings.
Magnetic probe
Temperature control: 0 -- 99 degrees C
Controlling the temperature difference: 0 -- 99 degrees C
Rated current: 5A (resistive load), the resistive heater below 1000W can be used safely
Dimensions (mm):138 x 98 x 40
Product features:
1 randomly set the start temperature (0 -- 99 degrees C) and stop temperature (0 -- 99 C),
Power supply of electric equipment automatic open and close all
2 temperature display, intuitive readings, simple operation
3 A new temperature sensor magnetic, sensitive reaction, high precision
Product Control Operating Instructions :
Because heating and cooling two requirements , so our thermostats have "hot start" and "cold start" two modes of operation .
1.High temperature start: " When you start temperature" is greater than " stop temperature ", the thermostat is in "hot start" state. For example : Set the "Stop temperature" of 20 ° C, " starting temperature" of 30 ° C, then when the measured temperature is higher than 30 ° C , the machine is turned on, running lights ( green ) light, power outlet at this time . When the measured temperature is less than equal to 20 ° C , the machine off, standby light ( red ) light, power outlet at this time . This start-up mode is mainly used for cooling, such as the open air , exhaust fan and so on.
2. Cold start: " When you start temperature" less than " stop temperature ", the thermostat is in the " cold start" condition. For example : Set the "Stop temperature" of 30 ° C, " starting temperature" of 20 ° C, then when the measured temperature is less than equal to 20 ° C , the machine is turned on, running lights ( green ) light, power outlet at this time . When the measured temperature is higher than 30 ° C, the machine off, standby light ( red ) light, power outlet at this time . This start-up mode is mainly used for heating .
Set Memory function:Thermostat will store your settings , set the time to ensure that power is not lost , without additional settings.
Magnetic probe
