ETH-MPI/DP Industrial Ethernet cable for S7-300/400 PLC Profinet cp5611

Used for the communication between S7-300/400 PLC and Ethernet port on your PG/PC, Internet or 3G wireless network by the MPI or DP interface.No more need USB or RS232C port. No need to revise the communication protocol and software, support Dynamic DNS, user can remote control the PLC by the internet. The RJ45 port,RS485 interface and power supply port are all isolated in order to suit harsh environment in the industrial scene.



This is professional made cable directly from industrial automation factory, not the home made version. The quality is guaranteed.



This cable have similar functions as siemens CP343-1, and can replace CP5611,CP5613,CP5512 and PC adapter



It supports Windows2000/Windows XP/Win7 (WinNT4/95/98/Me/DOS NOT SUPPORTED).



Features:

1. Auto detect baud rate
2.Support both MPI and DP.
3. You can connect PLC to ethernet port on PG directly, or networks with switches, to romote control your PLC.



Package include:

ETH-MPI/DP Cable x1 (Ethernet cable not included)
Driver CD x1
How to use:

1. Cable Connection . One end to MPI/DP port on PLC. Other end to RJ45 on your PC;

2. Set network ip to seem segment with converter.



nEO_IMG_Snap7.jpg

3. Switch on PLC power.

4. Install driver on CD or the newest version we offer.

5. Set PG/PC. Choose "Eth mpi" if you use MPI. or "Eth dp" if you use Profibus. or Auto.Test OK!

If test fail. Connect to "192.168.1.222" with browser to configure the converter, including IP, baud rate, rack/slot no.

nEO_IMG_Snap1.jpg

nEO_IMG_Snap3.jpg

6. Now you can program with STEP7 or WinCC. Besure your configuration is correct.

nEO_IMG_Snap12.jpg