EX1S 20MR/20MT programmable logic controller

12 input 8 Relay/transistor output 4 analog input 2 analog output Compatiable Fx1s series PLC controller‎



AD Analog Input parameters:

Analog Input Resolution: 12bit (bits), 0-4095;
Analog input range: 0-10V, optional 0-5V, 0-20MA, 4-20MA
Analog input acquisition frequency: 1kHZ (1000 times per second);
Analog reference voltage: 2500mV, external reference voltage;
Analog input register: (D8030, D8031, D8032, D8033)

--------------
PT100 temperature probe inputs:

PT100 input range: -250 degrees to 500 degrees, resolution： 0.1 degrees;
PT100 function testing: PT100 short circuit, over-temperature detection function;
Analog Output Resolution: 12bit (bits), 0-4095;
Analog Output collection frequency: 1kHZ (1000 times per second);
Analog input register: (D8030, D8031, D8032, D8033)

-------------------
NTC probe input (currently supports 10K, 50K):

PT100 input range: -25 degrees to 125 degrees, the resolution is 0.1 degrees;
PT100 function tests: NTC short circuit, over-temperature detection function;
Analog Output Resolution: 12bit (bits), 0 to 4095;
Analog Output collection frequency: 1kHZ (1000 times per second);
Analog input register: (D8030, D8031, D8032, D8033)

--------------------------
DA analog output parameters:

Analog Output Resolution: 12bit (bits), 0 to 4095;
Analog output range: 0-10V,0-5V, 0-20MA, 4-20MA
Analog Output collection frequency: 1kHZ (1000 times per second);
Analog reference voltage: 2500mV, external reference voltage;
Analog output register: (D8037, D8038);

ES1S-20MR / MT: DC24V power supply, 12 X points opto isolated inputs, 8 Y outputs - relay (MR) or transistor (MT);

ES1S-20MR / MT-4AD: DC24V power supply, 12 X points opto isolated inputs, 8 Y outputs - relay (MR) or transistor (MT), 4 analog inputs (default 0 to 10, selectable 0 ~ 5V, 0 ~ 20MA, 4 ~ 20MA);

ES1S-20MR / MT-4AD2DA: DC24V power supply, 12 X points opto isolated inputs, 8 Y outputs - relay (MR) or transistor (MT), 4 analog inputs (default 0 to 10, selectable 0 ~ 5V, 0 ~ 20MA, 4 ~ 20MA), 2 analog outputs (default 0 ~ 10,0 ~ 5V, 0 ~ 20MA, 4 ~ 20MA);


ES1S-20MR / MT-4PT: DC24V power supply, 12 X points opto isolated inputs, 8 Y outputs - relay (MR) or transistor (MT), 4-channel PT100 input (range: -250 degrees to 500 degrees, to distinguish 0.1 degrees);

ES1S-20MR / MT-4PT2DA: DC24V power supply, 12 X points opto isolated inputs, 8 Y outputs - relay (MR) or transistor (MT), 4-channel PT100 input (range: -250 degrees to 500 degrees, to distinguish 0.1 degrees), two analog output (default 0 ~ 10,0 ~ 5V, 0 ~ 20MA, 4 ~ 20MA);



Product Features :

1, support maximum 4-axis pulse output , maximum frequency up to 150Khz.(Transistor output)
2, two communications/downloading port , one RS485 communication port, and support Mitsubishi protocol and modbus master-slave protocol.
3, PLC supports writing , download, monitor , written during operation , clear the memory and other functions.
4 , support maximum 8 AB encoder counter , the default is 2 AB counters.
5 , super -capacity D registers , D0 ~ D7999 of 8000 . All registers can be set to maintain power .
Other features :

support Mitsubishi plc programming software , using 24V power supply , high voltage and low-voltage protection circuit to prevent accidents. Power RS485 communication port lightning protection design
download port : RS232 Xinje or Delta or communication cables , or to connect HMI
communication port : RS485 communication port supports Mitsubishi and MODBUS communication protocol . Automatic identification of customers plc communication protocol , no software conversion. Check the product manual modbus slave address table .
MODBUS master : The Mitsubishi plc optimized communication functions of the original [ RS ] . Customers only need to enter the number of modbus function code and read the data , you can automatically exchange data modbus master . Convenience to customers.
high-speed counter : X0 ~ X7 of seven counters of 8 channels , up to 100K, support AB count , max. 50K, support two channels simulteneously;
support all Mitsubishi interrupt instruction , and high-speed counter interrupt instruction , AB count interrupt instruction
other functions in accordance with the instruction table with Mitsubishi plc ;