Product Description
Part Number: STG740-E1GS4A-1-C-DHB-11S-B-21A0-F1,F5
Model: STG740 Gauge Dual Head Pressure Transmitter
Brand: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
Ordering Information
Model STG740 Gauge Dual Head Pressure Transmitter
Process Wetted Heads & Diaphragm Materials E Process Head Material:316 Stainless Steel
Diaphragm Material: 316L SS
Fill Fluid 1 Silicone Oil 200
Process Connection G Size/Type: 1/2" NPT (female)
Material: Same as Process Head(1)
Bolt/Nuts Materials S 316 SS
Vent/Drain Type/Location 4 Head Type: 316 SS
Vent Type: Standard Vent
Location: End
Vent Material: Matches Head Material(2)
Gasket Materials A Teflon® or PTFE (Glass Filled)
Head/Connect Orientation 1 Standard
High Side Left, Low Side Right(3) / Std Head Orientation
Approvals C ATEX Explosion proof, Intrinsically Safe & Non-incendive
Electronic Housing Material & Connection Type D Material: Polyster Powder Coated Aluminum
Connection: M20
Lighting Protection: Yes
Output/ Protocol H Analog Output: 4-20mA dc
Digital Protocol: HART Protocol
Customer Interface Selections B Indicator: Basic
Ext Zero, Span & Config Buttons: None
Languages: EN
Application Software 1 Standard Diagnostics
Output Limit, Failsafe & Write Protect Settings 1 Write Protect: Disabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(4): Honeywell Std (3.8 - 20.8 mAdc)
General Configuration S Factory Standard
Accuracy and Calibration B Accuracy: Standard
Calibrated Range: Custom (Unit Data Required)
Calibration Qty: Single Calibration
Mounting Bracket 2 Bracket Type: Angle Bracket
Material: 304 SS
Customer Tag 1 One Wired Stainless Steel Tag (Up to 4 lines 26 char/line)
Unassembled Conduit Plugs & Adapters A0 No Conduit Plugs or Adapters Required
Certifications & Warranty F1
F5 Calibration Test Report & Certificate of Conformance (F3399)
Certificate of Origin (F0195)
STG730,740,770 supplied via 1/2" flange adapter same material as process head except carbon steel shall use 316 SS
Except Carbon Steel Heads shall use 316SS Vent/Drain & Plugs and or 1/2" adapters
Left side/Right side as viewed from the customer connection perspective
NAMUR Output Limits are configurable by customer
Model: STG740 Gauge Dual Head Pressure Transmitter
Brand: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
Ordering Information
Model STG740 Gauge Dual Head Pressure Transmitter
Process Wetted Heads & Diaphragm Materials E Process Head Material:316 Stainless Steel
Diaphragm Material: 316L SS
Fill Fluid 1 Silicone Oil 200
Process Connection G Size/Type: 1/2" NPT (female)
Material: Same as Process Head(1)
Bolt/Nuts Materials S 316 SS
Vent/Drain Type/Location 4 Head Type: 316 SS
Vent Type: Standard Vent
Location: End
Vent Material: Matches Head Material(2)
Gasket Materials A Teflon® or PTFE (Glass Filled)
Head/Connect Orientation 1 Standard
High Side Left, Low Side Right(3) / Std Head Orientation
Approvals C ATEX Explosion proof, Intrinsically Safe & Non-incendive
Electronic Housing Material & Connection Type D Material: Polyster Powder Coated Aluminum
Connection: M20
Lighting Protection: Yes
Output/ Protocol H Analog Output: 4-20mA dc
Digital Protocol: HART Protocol
Customer Interface Selections B Indicator: Basic
Ext Zero, Span & Config Buttons: None
Languages: EN
Application Software 1 Standard Diagnostics
Output Limit, Failsafe & Write Protect Settings 1 Write Protect: Disabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(4): Honeywell Std (3.8 - 20.8 mAdc)
General Configuration S Factory Standard
Accuracy and Calibration B Accuracy: Standard
Calibrated Range: Custom (Unit Data Required)
Calibration Qty: Single Calibration
Mounting Bracket 2 Bracket Type: Angle Bracket
Material: 304 SS
Customer Tag 1 One Wired Stainless Steel Tag (Up to 4 lines 26 char/line)
Unassembled Conduit Plugs & Adapters A0 No Conduit Plugs or Adapters Required
Certifications & Warranty F1
F5 Calibration Test Report & Certificate of Conformance (F3399)
Certificate of Origin (F0195)
STG730,740,770 supplied via 1/2" flange adapter same material as process head except carbon steel shall use 316 SS
Except Carbon Steel Heads shall use 316SS Vent/Drain & Plugs and or 1/2" adapters
Left side/Right side as viewed from the customer connection perspective
NAMUR Output Limits are configurable by customer
