Product Description
USB-FP1 USB interface Panasonic PLC programming cable FP1 series PLC communication
Note: Due to domestic FP1 series PLC interface is a 4-pin, original FP1 interface is 8-pin (actually only 4-pin communication), so now FP1 PLC connection cable ends are round 4-pin, for good pinholes, no matter original or domestically PLC communications are possible
Features
Support FPSOFT V1.1 and above.
Support Windows 7/2000/Windows XP (WinNT4/95/98/Me/DOS NOT SUPPORTED).
baud rate: 300 bps ~ 1Mbps automatically adaptive.
USB bus-powered, with current consumption of 50 mA
Support UART data format: Data bit: 8, stop bit: 1, 2, Parity: odd / even / no parity
Compatible with USB V1.1 and V2.0
Reliable performance & reasonable price
Package info
1 x USB-FP1 PLC Programming Cable
1 x Programming Cable Drive
Note: Due to domestic FP1 series PLC interface is a 4-pin, original FP1 interface is 8-pin (actually only 4-pin communication), so now FP1 PLC connection cable ends are round 4-pin, for good pinholes, no matter original or domestically PLC communications are possible
Features
Support FPSOFT V1.1 and above.
Support Windows 7/2000/Windows XP (WinNT4/95/98/Me/DOS NOT SUPPORTED).
baud rate: 300 bps ~ 1Mbps automatically adaptive.
USB bus-powered, with current consumption of 50 mA
Support UART data format: Data bit: 8, stop bit: 1, 2, Parity: odd / even / no parity
Compatible with USB V1.1 and V2.0
Reliable performance & reasonable price
Package info
1 x USB-FP1 PLC Programming Cable
1 x Programming Cable Drive
